Regular Maintenance and Care
- Place abrasive walk-off mats (Coconut Coir Mats) outside entry doors and absorbent area rugs inside at all entrances to reduce soil migration into your home. Clean your entry rugs and mats frequently.
- Use furniture coasters to distribute the weight of heavy items and chair mats for chairs with wheels.
- To prevent fading, close drapes or blinds on south facing windows during hours of direct sunlight.
- Be careful not to spill when using bleach, mildew removers, laundry detergents, and other strong chemicals that can permanently discolour carpet fibers.
- Vacuum at least weekly, more often in busy traffic areas, to remove damaging abrasive dry soil particles that can scratch and dull fibers. Invest in a good quality vacuum cleaner with a beater bar attachment. Use the beater on the highest setting for thick soft carpets.
Periodic Professional Care
- Professional cleaning is recommended at least once every 12-18 months depending on use.
- Cleaning areas rugs can be challenging and should only be done in a controlled environment (at a rug cleaning facility) by a trained professional with experience cleaning wool rugs.
- Professional in-plant area rug cleaning removes the oily, sticky soils that vacuums can’t get out, and the soils that result from cooking vapours, air pollution, and tracked-in dirt. The rug cleaning facility should have a dry room where the rugs can be hung up to dry quickly in a controlled manner to ensure there is no shrinkage or dye run.
When Accidents Happen
- Act Quickly. Clean up spills promptly. The longer the spill sits there, the harder it’ll be to remove the stain.
- Pick up solid food spills gently with a spoon working from the outside toward the middle to avoid spreading the spill. Then proceed to next step.
- Blot up remaining stain or liquid spills with absorbent paper towels by folding the towels into a thick square and applying pressure from above. DO NOT RUB OR SCRUB!
- If you have a wet vacuum spot cleaner (highly recommended) use that to extract liquids before blotting dry.
- After extracting or blotting to the point where no more liquid transfers to the towels, mix a teaspoon of castile soap or equivalent mild neutral pH detergent into a liter of warm water and apply to remaining stain, agitate gently, then repeat blotting process until no more liquid transfers. Apply fresh water to rinse then repeat blotting until dry.
- Call for emergency professional service if the stain doesn’t come out.
- For flooding and water damage, call a professional cleaner to dry your carpet from the front and back to avoid mould and mildew problems.